Trailblazer Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey, just got the wind visors but I have to loosen or remove the mirrors to install the visors. Any one do this yet? Looks like I need to remove the interior trim to get to the mirror bolts but the trim looks like it’s one piece. How do is get it off with out breaking it?
Thanks
 

·
Registered
Joined
·
9 Posts
Hey, just got the wind visors but I have to loosen or remove the mirrors to install the visors. Any one do this yet? Looks like I need to remove the interior trim to get to the mirror bolts but the trim looks like it’s one piece. How do is get it off with out breaking it?
Thanks
  1. Front Side Door Inside Handle Bolt Finish Cap (1) » Remove
    Open In New TabZoom/Print

  2. Front Side Door Inside Handle Bolt (2) » Remove
  3. Front Side Door Armrest Pull Cup Bolt Cap (1) » Remove
    Open In New TabZoom/Print

  4. Front Side Door Armrest Bracket Bolt (2) » Remove
  5. Use an appropriate plastic trim tool to disengage the 9 front side door trim retainers (1).
    Open In New TabZoom/Print

  6. After the front side door trim is disengaged from the front side door, grasp it with both hands and lift upwards.
  7. Disconnect the front side door inside handle cable (1).
    Open In New TabZoom/Print

  8. Disconnect the electrical connectors. (2)
  9. Remove the front side door trim (3).
  10. Transfer components as necessary.
 
1 - 6 of 6 Posts
Top