[ZR2LIFE]

In about 6 months my Trailblazer will have a new carbon fiber front splitter, carbon fiber rear spoiler, window visors and license plate mount. I spent 4 hrs at company in Fremont CA today called Extreme Online Store. They 3D scanned my front and rear bumpers as well as the windows. The scans are now going going to their design team for modeling in Solid Works. Once the designs are finalized the prototypes will be made and test fitted to my Trailblazer. Once that is done I'll post the pics and ask them to join as a vendor. The front splitter will be RS specific, but the rear spoiler, window visors and license plate mount should fit all trims. I wish it didn't take so long, but their manufacturers are based in China and Taiwan in order to keep costs down. They appear to make very nice aero upgrades. I was able to check out a few of their cars like Corvette's, WRX's, BMW's, Civic's, Mustangs, etc.

Here is a link to their site.

Extreme Online Store

 

[Trail Blazed]

I would be interested in a dual exhaust lower rear panel that would fit an LT model

 

[ZR2LIFE]

I would be interested in a dual exhaust lower rear panel that would fit an LT model

They did briefly mention "we could do a new dual exhaust panel", but they didn't measure the rear bumper, just the liftgate, front bumper and windows. I can always ask about parts thats will fit other trims, but then they would also need an LT to scan for correct fitment.

 

[TrashPandaPerformance]

Nice hope they go all in. Your not gonna get crazy power out of these but making them look better is a great step.

 

[AndrewBarrrett72]

I can’t wait to see what they put out. I personally want to see a wide body on these bad boys.

 

[ZR2LIFE]

It's definitely for looks, an aero kit on a 3cyl CUV isn't going to make it faster, maybe slower in the top end, lol. I think I was just tired of seeing nobody make stuff for the Trailblazer, saw an opportunity and went for it. I'm a picky person so quality is key for me. If I don't like how it looks or the quality isn't there I'll pass, but from what I've seen so far they make decent stuff in ABS and carbon fiber.

 

[Canada03ZR2]

Very interested in following this and seeing what they can come up with. The splitter especially.

As Andrew said too, I want to see like a SEMA build on on of these. Lowered, wide body, etc. Always liked the Blazer Xtreme and what people were able to do with them in the S-Series.

 

[ZR2LIFE]

I would love to see what could be done with the Trailblazer and a SEMA version would be the way to do it. I would also like to see what the limits are for the 1.3 engine. I really think a reliable 200hp is attainable with this engine, but I haven't seen anyone try yet, maybe because the engine is so small.

 

[Trail Blazed]

We also need a ‘69 Camaro Style cowl induction hood.

 

[AndrewBarrrett72]

We also need a ‘69 Camaro Style cowl induction hood.

For a 1.3L engine? 😂 That would be amusing to see.

 

[Canada03ZR2]

Would be great if we could get a shark fin made that fits over the existing antenna base as well.

 

[TrashPandaPerformance]

Would be great if we could get a shark fin made that fits over the existing antenna base as well.

Honestly don't get the dislike of the antenna for the ugly ass shark fin plastic that fades terribly. Guess those who like it wanna be like everyone else on the road.

 

[Canada03ZR2]

Honestly don't get the dislike of the antenna for the ugly ass shark fin plastic that fades terribly. Guess those who like it wanna be like everyone else on the road.

Eh, its an antenna. The best look is one where I can't see it at all IMO and shark fin is best option to not see it. The factory antenna mount is flat black on the gloss black roof so it looks faded to begin with.

 

[TrashPandaPerformance]

I barely notice it personally. To each their own though.

 

[AndrewBarrrett72]

Honestly don't get the dislike of the antenna for the ugly ass shark fin plastic that fades terribly. Guess those who like it wanna be like everyone else on the road.

They’re also kind of flimsy.

 

[TrashPandaPerformance]

They’re also kind of flimsy.

Worse part is the shark fin is just a cover for the antenna. No real function at all other then some very stupid aerodynamic arguement some would make.

 

[ZR2LIFE]

The "whip" antenna as everyone calls them gets better reception than the "shark fin" version. I just read an article about how Chevy still uses the whip antenna on some new vehicles because it pulls in better reception which is important for people who live farther away from radio stations. I guess the real question is do you care more about looks or having the best reception? The whip doesn't really bother me, but I have replaced them with short style antennas that still get the same reception. I've had pretty good results with AntennaMastsRus which I currently have on my 05 & 18 ZR2's.

 

[Sattertrail]

 

[Jules_Levi]

In about 6 months my Trailblazer will have a new carbon fiber front splitter, carbon fiber rear spoiler, window visors and license plate mount. I spent 4 hrs at company in Fremont CA today called Extreme Online Store. They 3D scanned my front and rear bumpers as well as the windows. The scans are now going going to their design team for modeling in Solid Works. Once the designs are finalized the prototypes will be made and test fitted to my Trailblazer. Once that is done I'll post the pics and ask them to join as a vendor. The front splitter will be RS specific, but the rear spoiler, window visors and license plate mount should fit all trims. I wish it didn't take so long, but their manufacturers are based in China and Taiwan in order to keep costs down. They appear to make very nice aero upgrades. I was able to check out a few of their cars like Corvette's, WRX's, BMW's, Civic's, Mustangs, etc.

Here is a link to their site.

Extreme Online Store

Any updates on this yet?

 

[ZR2LIFE]

Any updates on this yet?

Still waiting, but thanks for reminding me. I'll call them and see what's going on.