[Wiseman]

First, I wanted to thank everyone who contributed in the past (reading old posts), and new posts regarding wheel spacers. Explaining what kind is the best (hub vs lug), what kind of material is better, what to look for and other little but important things. After searching internet left and right, I simply could not find store that sell is for our vehicle, so I turn to "Made in America" search and I found company called BORA, who makes all kinds of spacers, and I asked them for custom made. I got email back from them, and they make their spacers from Aluminum ( 6061 T6 aircraft billet) which is lighter and stronger than steel.
I am all in, but need to decide what width I wanted to go, so my wheels are flushed with car. Is it 1 inch, 1.25 inches or 1.50 inches (I think this is too wide). Please post any pictures if you have or/and comment your opinion.

Thank you

 

[Wiseman]

Well, I made a bite on it, and going for 1.25inch ... Ordered this morning. Now I wait to accompany that with Eibach springs.

 

[Daniel]

This is gonna look great! I cant wait to see pics so I can decide if we want to mimic it. Can you put a cost breakdown up as well?

 

[Wiseman]

This is gonna look great! I cant wait to see pics so I can decide if we want to mimic it. Can you put a cost breakdown up as well?

I sure will. Well, for the starters I paid custom spacers $310 + $370 for springs. Total, as you can see is $680. Added stubby antenna
($20), so now we are at $700. K&N Air filter was $65 and Pure Hepa cabin filter was $35. Now we are at $800. There was also LED headlights $60, and 6 interior LEDs $55 (I went with heatsink Sylvania). SO total now is $915